SKU:
Sandstone Crazy Cladding
Seal & Finish Low Sheen
Seal & Finish Low Sheen
-
Reliable shipping —Stress free shipping knowing your stones and tiles are safe
-
All orders — are dispatchedas soon as possible!
-
Quality Guaranteed — We back all products with a 1 year guarantee.
SQUARE METRES (m²) Calculator
This calculator is to help you understand how many square metres of tiles you need.
Choose your option
Couldn't load pickup availability
Key Features
- May be used as a pre-grouting sealer
- Allows moisture vapor transmission
- Safe to use, low odour, low VOC
- Is unaffected by ultra-violet light
- Water-based formula
- Last up to 3 years
For use on
A low sheen sealer for clay pavers including Saltillo, terra-cotta and adobe, cement tile, quarry, slate and sandstone.
Limitations
- Do not allow product to come in contact with any non-recommended surface.
- Not recommended for use on glazed ceramic or porcelain tile.
- Not recommended for use around pools, showers or areas subject to standing water.
- Keep surface clean and dry to reduce possibility of slip-fall accidents.
- Not recommended for countertops.
General Surface Prep
Surface should be dry, clean and free of waxes, sealers, or finishes. Do not apply directly over silicone sealers, oil or wax based finishes. Aqua Mix® Sealer & Coating Remover will strip the surface and remove wax or old acrylic finishes. Place a few drops of water on various tiles. If water doesn’t penetrate, additional removal is necessary. New installations need to dry at least 48 hours before application. Clay and Saltillo tile may require extended drying time depending on temperature and humidity. Make sure the tiles are completely dry before application.Test product in an inconspicuous area to ensure desirable results.
The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE
Application of Product
Read entire label before using. For new installations, sealer can be applied to a dry surface as soon as 48 hours after grouting. Surface must be clean, dry, and free of existing sealers or coatings. Apply 2-3 coats of sealer with a clean, dense sponge, brush or paint pad applicator in thin, even coats. Allow 30 minutes drying time between coats.
Product Data Sheets
Cleaning of equipment
Clean tools with mineral spirits immediately after use
Pre-Grouting Application
Apply over clean stone or tile a minimum of 2 hours prior to grouting – follow application procedures above. For a high sheen finish on interior surfaces only, apply Aqua Mix® Floor Shine & Hardener over Seal & Finish Low Sheen. Allow a minimum of 2 hours drying time before applying Aqua Mix® finishes.
Drying Time
- Ready for surface traffic 6 hours after final coat.
- Keep area dry for at least 12 hours.
- Achieves a full cure in 24 hours.
Good — This vintage item remains fully functional, but it shows sign of age through scuffs, dings, faded finishes, minimal upholstery defects, or visible repairs.
Description
Description
Key Features
- May be used as a pre-grouting sealer
- Allows moisture vapor transmission
- Safe to use, low odour, low VOC
- Is unaffected by ultra-violet light
- Water-based formula
- Last up to 3 years
For use on
A low sheen sealer for clay pavers including Saltillo, terra-cotta and adobe, cement tile, quarry, slate and sandstone.
Limitations
- Do not allow product to come in contact with any non-recommended surface.
- Not recommended for use on glazed ceramic or porcelain tile.
- Not recommended for use around pools, showers or areas subject to standing water.
- Keep surface clean and dry to reduce possibility of slip-fall accidents.
- Not recommended for countertops.
General Surface Prep
Surface should be dry, clean and free of waxes, sealers, or finishes. Do not apply directly over silicone sealers, oil or wax based finishes. Aqua Mix® Sealer & Coating Remover will strip the surface and remove wax or old acrylic finishes. Place a few drops of water on various tiles. If water doesn’t penetrate, additional removal is necessary. New installations need to dry at least 48 hours before application. Clay and Saltillo tile may require extended drying time depending on temperature and humidity. Make sure the tiles are completely dry before application.Test product in an inconspicuous area to ensure desirable results.
The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE
Application of Product
Read entire label before using. For new installations, sealer can be applied to a dry surface as soon as 48 hours after grouting. Surface must be clean, dry, and free of existing sealers or coatings. Apply 2-3 coats of sealer with a clean, dense sponge, brush or paint pad applicator in thin, even coats. Allow 30 minutes drying time between coats.
Product Data Sheets
Cleaning of equipment
Clean tools with mineral spirits immediately after use
Pre-Grouting Application
Apply over clean stone or tile a minimum of 2 hours prior to grouting – follow application procedures above. For a high sheen finish on interior surfaces only, apply Aqua Mix® Floor Shine & Hardener over Seal & Finish Low Sheen. Allow a minimum of 2 hours drying time before applying Aqua Mix® finishes.
Drying Time
- Ready for surface traffic 6 hours after final coat.
- Keep area dry for at least 12 hours.
- Achieves a full cure in 24 hours.
Additional Info
Additional Info
Detailed Condition
Detailed Condition
Good — This vintage item remains fully functional, but it shows sign of age through scuffs, dings, faded finishes, minimal upholstery defects, or visible repairs.
Testimonials
Keep Up The Good Work!Just a quick email to say how much I enjoyed shopping on your website. Much better and easier to use than any other antiques website I have visited before.
James C. from North London
Just a quick email to say how much I enjoyed shopping on your website. Much better and easier to use than any other antiques website I have visited before.
James C. from North London
Excellent ServiceThank you for such prompt and efficient service. We do appreciate that!
Amanda from Colchester
Thank you for such prompt and efficient service. We do appreciate that!
Amanda from Colchester
Thank You for Packing it So Well.To Adam and Angela at Antiques Dealer, I am simply informing you that my order arrived safely today and is simply amazing. He will be very well taken care of.
Derek
To Adam and Angela at Antiques Dealer, I am simply informing you that my order arrived safely today and is simply amazing. He will be very well taken care of.
Derek
The Service and The After Sales Ddvice Was Simply Excellent.I purchased a painting from Unicorn. I received great service and was very pleased with my purchase, which I bought without actually seeing it in person.
Ken from New York
I purchased a painting from Unicorn. I received great service and was very pleased with my purchase, which I bought without actually seeing it in person.
Ken from New York
