Megapoxy PM

Gap filling epoxy paste adhesive for civil engineering use.

Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. It is easy to use 1:1 mixing make it suitable for onsite applications.

Uses:

• Precast concrete articles
• Concrete Pipes and Tanks
• Grouting bolts
• Fibreglass articles
• Natural stones
• Concrete floors and stairs
• Bricks and ceramics
• Concrete columns
• Metals
• In-situ formed concrete

Surface Preparation:

Metals: Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only.

Painted Surfaces: A proprietary brand paint stripper should be used. Concrete - the surface may be either flame cleaned or mechanically abraded.

Processing Data:

Mixing Ratio:1 part resin to 1 part hardener by volume

Mixing: Mix until uniform grey or white

Working Life at 25°C: 45 minutes

Minimum Application temperature: 10°C

Minimum Cure Time: 12 hours at 25°C

Full Cure Time: 4 days at 25°C